Contacts
Location
Mumbai – 400072
Contact
sales@velqor.com
Steam & High-Temperature Hoses
Wire-braid steam hose rated to ISO 6134 Type 2 for saturated and superheated steam service up to 450°F.
Need Steam-Rated Hose?
Share your steam condition and temperature and we’ll confirm the right hose.
Send RequirementSteam-Rated Hose for High-Temperature Process Service
Steam service places extreme demands on hose construction — this series is built specifically for saturated and superheated steam, with a black chlorobutyl tube and multiple wire braid reinforcement rated to ISO 6134 Type 2. Service temperature reaches 406°F for saturated steam and 450°F for superheated steam, with a 20:1 design factor reflecting the safety margin steam applications require. It's specified for cleaning containment vessels, manufacturing equipment, and refinery/process plant steam lines.
- Black chlorobutyl tube rated for steam service
- Multiple wire braid reinforcement, ISO 6134 Type 2 compliant
- Saturated steam to 406°F, superheated steam to 450°F
- 20:1 design factor for steam-service safety margin
- Black-and-red EPDM alternating spiral cover, perforated wrapped finish
Steam & High-Temperature Hoses
Variants Available
Configurations Available
Every configuration below is confirmed against your requirement, drawing, or sample before production.
Built to the recognized international standard for steam hose.
Full saturated-steam service rating.
Extended rating for superheated steam conditions.
Braided-wire reinforcement for steam-service pressure and heat.
Sized from 1/2-inch through 1-inch inner diameter.
Cut, coupled, and pressure-tested to your specified assembly length.
Specifications
Typical Specification Inputs
Steam hose, wire-braid reinforced
1/2″ through 1″
Up to 261 psi (18 bar), per size
Multiple wire braid
Black chlorobutyl
-40°F to +406°F saturated / +450°F superheated steam
ISO 6134 Type 2; 20:1 design factor
Matched to your thread standard — BSP, NPT, JIC, or flange
Final specifications, dimensions, materials, and performance details are confirmed against approved drawings, samples, or order requirements before production.
Applications
Where This Hose Is Used
Steam supply and cleaning lines in production facilities.
Process steam handling in refinery and petrochemical settings.
Cleaning containment vessels and manufacturing equipment with steam.
Heating and cleaning process equipment across industrial settings.
Steam-service connections for testing and process validation.
Cut and coupled to your specified length and end configuration.
RFQ Checklist
To Quote This Hose Accurately, We Need a Few Details
Share as much as you can — a drawing, sample, or existing part reference speeds up the process considerably.
Frequently Asked Questions
What's the maximum steam temperature this hose can handle?
Saturated steam to 406°F and superheated steam to 450°F — share your process conditions and we'll confirm suitability.
What standard does this hose meet?
ISO 6134 Type 2, with a 20:1 design factor reflecting the safety margin required for steam service.
What sizes are available?
1/2-inch through 1-inch inner diameter, with working pressure up to 261 psi depending on size.
Is this hose rated for vacuum/suction service?
No, vacuum service is not recommended for this series.
Do you supply cut hose or assembled/tested lengths?
Both — bulk hose by the carton, or cut, coupled, and pressure-tested assemblies to your specified length.
What end fittings are available?
End fittings are matched to your thread standard — BSP, NPT, JIC, or flange — confirmed with your hose order.
Can Velqor support bulk export orders?
Yes, Velqor is set up for export-ready packaging and documentation. Share your destination country and quantity so we can confirm logistics.
Get Started
Ready to Source Steam & High-Temperature Hose?
Send your inner diameter, steam condition, pressure and temperature requirement, and assembly length. We'll review your requirement and confirm the right hose.