Contacts
Location
Mumbai – 400072
Contact
sales@velqor.com
Elbow & Tee Fittings
45° and 90° elbows, tees, and crosses machined from bar stock for directional and branch connections within a hydraulic circuit.
Need a Custom Elbow or Tee?
Share your thread standard, angle, and connection points and we’ll confirm the right fitting.
Send RequirementDirectional & Branch Fittings for Tight Routing
Elbows, tees, and crosses change the direction of a hydraulic line or split a single line into two or three connection points. Velqor supplies 45° and 90° elbows, run and branch tees, and four-way crosses machined from bar stock, matched to your thread standard and swivel or fixed configuration. These fittings are typically used where straight-line routing is not possible or where a single port needs to feed multiple downstream connections.
- 45° and 90° elbow fittings, fixed or swivel configuration
- Run tees and branch tees for splitting a single line into two
- Four-way cross fittings for multi-port branch connections
- Thread standards: BSP, NPT, JIC 37° flare, ORFS, metric DIN
- Matched to port, hose, or tube size before confirming a quote
Elbow & Tee Fittings
Variants Available
Configurations to Match Your Routing
Every configuration below is confirmed against your requirement, drawing, or sample before production.
Right-angle direction change, fixed or swivel, for tight routing corners.
Gentler direction change where bend radius or clearance is limited.
Split a single line into two connection points, in-line or branched.
Multi-port branch connections for manifold-style circuits.
Body material confirmed per requirement and operating environment.
Swivel-nut versions engineered for assemblies requiring rotational alignment.
Specifications
Typical Specification Inputs
45° elbow, 90° elbow, run tee, branch tee, or four-way cross
BSP, BSPT, NPT, NPTF, JIC 37° flare, ORFS, metric DIN
Matched to port, hose, or tube size at each connection point
Carbon steel, SS304, SS316, or brass — as per requirement
Swivel-nut or fixed-body configuration, confirmed per assembly need
O-ring boss, bonded washer, or metal-to-metal flare/face seal, per thread type
Confirmed per requirement, size, and material selection
Zinc-nickel plated, passivated, or plain, per specification
Final specifications, dimensions, materials, and performance details are confirmed against approved drawings, samples, or order requirements before production.
Applications
Where These Fittings Are Used
Directional change where straight-line hose or tube routing isn't possible.
Branch connections feeding multiple downstream circuit points.
General-purpose directional fittings across mobile and stationary equipment.
Routing pump, valve, and reservoir connections around fixed obstructions.
Directional and branch connections for test rigs and assembly stations.
Non-standard angles or branch configurations engineered to your drawing.
RFQ Checklist
To Quote This Product Accurately, We Need a Few Details
Share as much as you can — a drawing or sample photo speeds up the process considerably.
Frequently Asked Questions
What's the difference between a run tee and a branch tee?
A run tee keeps the main flow path in line with one branch off to the side; a branch tee splits flow more evenly across three connection points. Share your circuit layout and we'll confirm the right configuration.
Do you supply swivel elbows?
Yes, swivel-nut elbows are available where the assembly needs rotational alignment after installation.
Can you match an existing elbow or tee?
Yes — share a drawing, sample, or clear photo with thread markings and we'll confirm a matching configuration.
What materials are available?
Carbon steel, stainless steel 304/316, and brass, confirmed per requirement and application.
Can Velqor manufacture as per drawing or sample?
Yes. We regularly machine to an approved drawing, sample, or specification provided by the buyer.
What lead times should I expect?
Lead time depends on size, material, and quantity — share your requirement and we'll confirm a timeline with your quote.
Can Velqor support bulk export orders?
Yes, Velqor is set up for export-ready packaging and documentation. Share your destination country and quantity so we can confirm logistics.
Get Started
Ready to Source Elbow & Tee Fittings?
Send your fitting type, thread standard, size, and quantity at each connection point. We'll review your requirement and confirm the right configuration.